Storage Drawer (Vase Mode Option) – Elegoo Neptune 3 Pro 3D Printer Model Free Download

Author: @SDio

File formats: stl,gcode

Download type: zip

Size:402.2KB

The file 'Storage Drawer (Vase Mode Option) – Elegoo Neptune 3 Pro 3D Printer Model' is (stl,gcode) file type, size is 402.2KB.

Description Files (9)

Summary

I designed a storage box with two small drawers for my Elegoo Neptune 3 Pro printer.

Design higlights;

Option to print with vase mode

Reduces print time and material by ~70 percent
I pushed limits and used 0.4mm noozle with 0.8mm line width and 0.3mm layer height (you can always lower numbers or use a 0.6-0.8mm noozle for finer print )
Added another chassis option with V2 for additional support for drawers on vase mode)
I didn't want to remove front cover so modified V-slot clips a bit.
You may need to scale drawers according to your print settings.
I added an experimental version (v4) to avoid overhang of top wall while printing on vase mode.

PS: Photos are from vase mode print. I slightly modified drawer dimensions later on.

ElegooN3P_Drawer_Chassis_V1.stl	18.5KB
ElegooN3P_Drawer_Chassis_V2.stl	18.5KB
ElegooN3P_Drawer_Chassis_V4_Experimental.stl	29.4KB
ElegooN3P_Storage_DrawerA.stl	8.5KB
ElegooN3P_Storage_DrawerB.stl	8.3KB
EN3PRO_Drawer_Chassis_V1_Vase_Mode.gcode	721.2KB
EN3PRO_Drawer_Chassis_V2_Vase_Mode.gcode	721.2KB
EN3PRO_Storage_DrawerA_Vase_Mode.gcode	91.4KB
EN3PRO_Storage_DrawerB_Vase_Mode.gcode	110.8KB