Storage Box (explorers & Pirates) 3D Printer Model
The file 'Storage Box (explorers & Pirates) 3D Printer Model' is (stl) file type, size is 272.2KB.
The file 'Storage Box (explorers & Pirates) 3D Printer Model' is (stl) file type, size is 272.2KB.
This is the storage-solution for my explorers & pirates expansion: http://www.thingiverse.com/thing:1588996
To use this box you need to have printed the main game and the seafarers expansion allready. The box offers space for the following hex-pieces:
19 x water
1 x council
1 x wool
1 x wood
4 x gold
6 x spice
6 x fish
1 x ore
1 x counter-fish-victory-point
1 x counter-spice-victory-point
1 x counter-gold-victory-point
For the box you need to print the following parts:
2 x storage core (If you used self-adhesive-foil to cover the buttom of your tiles or anything that makes them thicker than the original files, print 2 x storage core big)
1 x storage part 2
1 x storage top
1 x storage center (If you used self-adhesive-foil to cover the buttom of your tiles or anything that makes them thicker than the original files, print storage center big)
1 x storage center top
1 x council (placeholder)
6 x spice (placeholder)
6 x fish (placeholder)
All the other placeholder-parts you find them here:
The biggest sices you need to print are 19.5 cm x 20.00 cm (7.67 x 7,87 inches). So make shure you're printerbed is big enough. For transporting the box, make sure that you grab it on the bottom, not the top...
Have fun :-)
| council.stl | 35.3KB | |
| fish.stl | 16.8KB | |
| spice.stl | 28.2KB | |
| storage_center.stl | 2.2KB | |
| storage_center_big.stl | 2.2KB | |
| storage_center_top.stl | 130.4KB | |
| storage_core.stl | 129.3KB | |
| storage_core_big.stl | 149.7KB | |
| storage_part_2.stl | 69.3KB | |
| storage_top.stl | 516.0KB |
