Storage Bin Divider (Akro-Mils) 3D Printer Model
The file 'Storage Bin Divider (Akro-Mils) 3D Printer Model' is (STL) file type, size is 617.6KB.
The file 'Storage Bin Divider (Akro-Mils) 3D Printer Model' is (STL) file type, size is 617.6KB.
I made these at work for someone in the Production group. Basically, it's pulling teeth to get the stock person to order these dividers special so I was asked to make them since we have a printer at work now and it's not being used regularly.
I only made the types for the bins on one rack. I have seen several that all have slightly different shapes and fitting edges. There is one more larger bin that I may add later, but I had to reinforce the 40-140 (which may not be the real number since we don't have any of these for me to copy)
I labeled each part so if they decided they needed more for other racks, they would know exactly what number they needed.
No infringement intended with Akro-Mils, if you can get the real parts, you probably should. These were made to help someone who couldn't get them unless he bought them himself.
EDIT: 02/04/2020
Revised the 40-140. It needed greater strength to support parts in the bin across such a long gap.
EDIT: 12/22/2021
Added a rough 40-150 by request. It's a slab, all the other bin dividers have thicker top sections and thinner bottoms. I don't have access to this bin to test, so it is based on the dimensions provided.
| BinDivider-40-120.STL | 495.7KB | |
| BinDivider-40-130.STL | 551.8KB | |
| BinDivider-40-140.STL | 515.2KB | |
| BinDivider-40-150test.STL | 94.0KB |
