PrintABlok are interlocking building toys created by the 3D Printing Professor, designed towork well on home 3D Printers. PrintABloks can be built in all 6 directions, allowing for gravity defying building unlike any other building block out there.
Want to organize your stuff into drawers, but the drawer sets at the store just aren't quite right? StorABloks have got you covered with this awesome set of drawers of all sizes that snap together nicely and can hold all your stuff.
If you are interested in getting a greater variety of blocks, including articulated blocks and decorative elements to build PrintABlok mechs, you can check premium sets here:
While PrintABloks are design and will print will with any material and most common settings, for best results the following is recommended:
Layer height 0.16 or lower
Print connectors in PetG
And that's it. Enjoy.
Tags
| 980a_Double_Handle_Blok.stl | 27.4KB | |
| 980b_Handle_Block_Triple.stl | 38.1KB | |
| 980c_Label_Holder.stl | 42.7KB | |
| 981a_Drawer_Case_Mini_30x30x18.stl | 776.8KB | |
| 981b_Drawer_Mini_30x30x18.stl | 52.6KB | |
| 982a_Drawer_Case_Small_46x50x50.stl | 1.4MB | |
| 982b_Drawer_Small_46x50x50.stl | 164.1KB | |
| 983a_Drawer_Case_Med_78x80x49.stl | 2.6MB | |
| 983b_Drawer_Med_78x80x49.stl | 280.7KB | |
| 984a_Drawer_Case_Med_Tall_78x80x75.stl | 3.3MB | |
| 984b_Drawer_Med_Tall_78x80x75.stl | 468.6KB | |
| 985a_Drawer_Case_Small_Craft_46x16x118.stl | 1.9MB | |
| 985b_Drawer_Small_Craft_46x16x118.stl | 62.4KB | |
| 986a_Drawer_Case_Craft_46x48x118.stl | 2.6MB | |
| 986b_Drawer_Craft_46x48x118.stl | 174.6KB |
