I did this to try out some new 3D modelling techniques in Blender, and it was nice enough that it might be useful to someone. Although it was designed in 1/56 scale, I have successfully print it scaled it down to 1/100 (15mm to wargamers) so it should also work for HO (1/87) or OO (1/76) scale railway layouts or 1/72 dioramas.
Print the roof on its end with the chimney cutout at the top, then no support is needed - also on an FDM printer, the layering will then align with the slope of the roof shingles with this orientation. I used PLA on an Ender3 with a layer height of 0.2mm or 0.15mm
| stone_cottage_roof.stl | 2.6MB | |
| stone_cottage_walls.stl | 14.7MB |
