Stofzuiger Adapter Miele-eSun 3D Printer Model
The file 'Stofzuiger Adapter Miele-eSun 3D Printer Model' is (stl) file type, size is 54.4KB.
The file 'Stofzuiger Adapter Miele-eSun 3D Printer Model' is (stl) file type, size is 54.4KB.
After designing a vacuum-aid to use inside the vacuum bag when vacuuming my filament before storage, I tried it out. It worked. (Of course 😊)
Tired from all this pumping I thought there has to be an easier way and started looking on the internet. After finding several aids to use inside the bag (again of course) I found and attachment to use on a 2.5” vacuum hose.
Because this didn’t fit, or looked in all the wrong places, I drew my own attachment. I can be used with the rubber seal from the eSun pump and connected to a Miele vacuum cleaner. The cleaner hose has a diameter of approximately 35mm.
The pump (the rubber part on the bottom) I used can be found at:
https://www.esun3d.com/evacuum_kit-product
@TT-Vert; Thanks for the inspiration!
https://www.thingiverse.com/thing:6800949
| Stofzuiger_adapter_Miele-eSun.stl | 167.1KB |
