Original models:
saper_2's "ST-Link stlink V3 set expansion board cover with pin guards" :
https://www.thingiverse.com/thing:4819130
gamalot's "ST-Link V3SET Bottom Cover":
https://www.thingiverse.com/thing:3163349
As a main change I added hole for the CN9 connector which is a tight fit so the jumpers won't fall off
Additionally, I redesigned the goldpin covers (added by saper_2) - the arches were replaced with straight overhangs - these do not required supports
| STLink-V3_coverSup.stl | 116.8KB |
