Stirling Engine Of Gamma Type 3D Printer Model
The file 'Stirling Engine Of Gamma Type 3D Printer Model' is (STL) file type, size is 602.7KB.
The file 'Stirling Engine Of Gamma Type 3D Printer Model' is (STL) file type, size is 602.7KB.
It's simple design of a Stirling engine of gamma type, made on SolidWorks. I have originally made this project for a high school project, 5 years ago. This engine was totally functional, and work very well if you put it on a coffee cup for example. But after a Matlab simulation, the yield was a little bit under a normal yield for a 3D printed Stirling engine. So feel free to improve it!
I have by inadvertently lost all the pictures of the original engine (who i have let at my high school), and i have no remade it since; it's why there is no pictures available.
I used simple wire to make the rod, a piece of balloon to make the piston, and a piece of extruded polystyrene to make the displacer.
The hot plate and cold plate was made in a 2 millimetres sheet steel.
Sorry for the English mistakes, I’m French...
| axe.STL | 7.5KB | |
| axe_déplaceur.STL | 7.5KB | |
| axe_manivelle.STL | 7.5KB | |
| bielle_déplaceur.STL | 7.5KB | |
| bielle_piston.STL | 7.5KB | |
| chappe.STL | 193.4KB | |
| corps_déplaceur.STL | 189.9KB | |
| guide_déplaceur.STL | 297.8KB | |
| maneton.STL | 127.9KB | |
| manivelle_piston.STL | 26.8KB | |
| plaque_chaude.STL | 66.5KB | |
| plaque_froide.STL | 91.5KB | |
| volant.STL | 832.1KB |
![[12] Air Pressure Engine (Pneumatic) – 6 Cylinder (axial) – 409 Ccm 3D Printer Model](https://res.3axis.co/8efa32ad-a69d-4279-a0c7-8843b25fabbf/images/d11b28b9-6e4e-46d8-9dce-4c66fedea700_thumb.jpg)
