Stinky Slinky Fence End Cap 3D Printer Model
The file 'Stinky Slinky Fence End Cap 3D Printer Model' is (stl) file type, size is 28.0KB.
The file 'Stinky Slinky Fence End Cap 3D Printer Model' is (stl) file type, size is 28.0KB.
I got a new (to me) truck camper and it doesnt have a proper storage for the sewer hose. As I have the camper on a flatbed truck, I just added a 5" PVC fencepost long enough to fit the hose and printed these end covers to keep it safe.
I left openings for any water to be dried out in the wind - it is secured via a post in the bottom and a 1" by 1/4" bolt through the top. A 1/4" nut is embedded into the cap. I designed the slot for the nut to be tight so that it would have to be inserted by heating the nut with a soldering iron so that once it cools, the nut will stay in place.
I added a knob to the bolt to make it easier to tighten down and remove - see https://www.thingiverse.com/thing:5175818
| StinkySlinkyFenceEndCap.stl | 133.3KB |
