Stinger V2 – Rubber Band Launched Free Flight Glider 3D Printer Model
The file 'Stinger V2 – Rubber Band Launched Free Flight Glider 3D Printer Model' is (stl,3mf) file type, size is 4.1MB.
The file 'Stinger V2 – Rubber Band Launched Free Flight Glider 3D Printer Model' is (stl,3mf) file type, size is 4.1MB.
This is the 2nd iteration of a 3D printable toy glider that can be launched by hand or more reliably with a 3D printed rubber band shooter.
Demo video: https://youtu.be/3ou4tPLpRGk
Changes for v2:
The cockpit and nose parts are resized for double wall printing for robustness. For extra crash resistance the nose can also be printed with flex material.
The plane should be launched flat or with a slightly downwards trajectory, ideally from some height. If more weight is added to the nose, by adding infill to the nose part, the glider can be made speedier.
Depending on printing speed all the parts can be printed in less than 5 hours, and glued together in 5-10 minutes with CA glue.
Please post MAKES of your prints. :)
| cockpit.stl | 449.2KB | |
| locator_x_3.stl | 4.2KB | |
| nose.stl | 651.1KB | |
| PI3MK3M_Stinger_CURA.3mf | 1.6MB | |
| rubberbandshooter.stl | 1.3MB | |
| Stinger_all_parts.stl | 15.2MB | |
| wingL1.stl | 514.8KB | |
| wingL2.stl | 307.6KB | |
| wingR1.stl | 748.3KB | |
| wingR2.stl | 307.6KB |
