V2
This is a 3D printable toy glider that can be launched by hand or more reliably with a 3D printed rubber band shooter. The plane should be launched flat or with a slightly downwards trajectory, ideally from some height. If more weight is added to the nose, by adding infill to the nose part, the glider can be made speedier.
Depending on printing speed all the parts can be printed in about 5 hours and glued together in 5-10 minutes with CA glue.
Demo video: https://youtu.be/3ou4tPLpRGk
UPDATE V2: Redesigned cockpit and nose to print with two perimeters for better strength. The nose can now also be printed with flex material for better crash resistance.
| cockpit.stl | 449.2KB | |
| locator_x_3.stl | 4.2KB | |
| nose.stl | 651.1KB | |
| PI3MK3M_Stinger_CURA.3mf | 1.6MB | |
| rubberbandshooter.stl | 1.3MB | |
| Stinger_all_parts.stl | 15.2MB | |
| wingL1.stl | 514.8KB | |
| wingL2.stl | 307.6KB | |
| wingR1.stl | 748.3KB | |
| wingR2.stl | 307.6KB |
