The Stihl Filling System is great. Screw it to the oil cannisster and fill your chainsaw without spilling a drop. But the system will only fit to Stihl cans with quite expensive oil.
I found another oil and first used a funnel to fill it into the stihl can.
Now I made the adapter, which works fine.
Please note that can be a harm to nature - even the organic oil - so don´t spill it!
I added a gasket as well. It´s much easier to get it tight with the seal. Print it from TPU.
You can proof it by gently pressing the can: You will hear the air passing off, if it's not tight enough. This is importend: When it´s not airtight, the system will not work well.
I made my adapter from PLA and I am not sure how long it will last.
So another warning: Use it as careful as I do. Don't leave it on for a longer time and check it's tightness and stability everytime you use it.
Here is my adapter for fuel-cans:
| dichtung_oel.FCStd | 8.0KB | |
| gasket_oil.stl | 16.9KB | |
| stihl_adapter_oelv2.FCStd | 181.6KB | |
| stihl_adapter_oelv2.stl | 167.4KB |
