This is a building kit of the locomotive Rocket from 1829.
It is a model that you rarely see on the model railway. would be nice to have one in my garden railroad. Which I now have. www.utj.se
I have printed it on the Replicator 2X ABS.
I do not believe you need a model railway to print this model. It also works well to put on a shelf if you want. Or as a toy. The gauge of this locomotive is 45mm same as LGB.
The model is 25cm long. model is painted with colors corresponding to the model. To see images of the original locomotive, look at the web / Stephenson's Rocket / Images.
The Rocket that I made a 3D model of in Nov 2014, and who has become very popular and has now been downloaded a large number of times.
Engine instalation for this model available at
http://www.thingiverse.com/thing:585593
Wagon to this locomotive can be found here .
http://www.thingiverse.com/thing:575549
The new covered coach you can find here.
http://www.thingiverse.com/thing:1175018
suitable track for this model can be found at
http://www.thingiverse.com/thing:507264
Sleepers suitable for rails
http://www.thingiverse.com/thing:38609
Railway Buffer Stop
http://www.thingiverse.com/thing:507254
| 01_the_bottom_plate.stl | 112.4KB | |
| 02_the_bottom_plate_for_boiler.stl | 55.2KB | |
| 03_steam_boiler_with_flange_for_pipes.stl | 557.0KB | |
| 04_the__bigg_barrow__stora_tunnan.stl | 683.5KB | |
| 05_wheel_locomotive_large_driving_print_2_pieces.stl | 118.7KB | |
| 06_2019New_steam_cylinder_with_pipes_mirrored._Put_on_the_right_side..stl | 315.5KB | |
| 07_2019New_steam_cylinder_mirrored._Sitting_on_the_left_side..stl | 175.7KB | |
| 08_coupling_rod_print_2_pieces_Koppelstng.stl | 187.1KB | |
| 09_piston_rod__kolvstng__print_2_pieces.stl | 88.1KB | |
| 10_Chimney__base__print_with_suport.stl | 78.2KB | |
| 10_Chimney__bottom_part.stl | 92.3KB | |
| 12_Chimney__middle_part.stl | 75.9KB | |
| 13_Chimney__top_part.stl | 103.9KB | |
| 14_Chimney__top_ornament.stl | 97.1KB | |
| 15_L_upper_steam_pipe_V.stl | 158.7KB | |
| 15_R_upper_steam_pipe_H.stl | 176.5KB | |
| 16_lower_steam_pipe.stl | 389.0KB | |
| 17_coupler_pin_locomotive.stl | 20.3KB | |
| 18_coupling_ring_locomotive.stl | 30.0KB | |
| 19_front_spring_pack_print_2_pieces.stl | 111.8KB | |
| 20_rear_axle_print_2_pieces.stl | 6.9KB | |
| 21_front_axle_half_print_2_pieces.stl | 3.8KB | |
| 22_holder_for_the_rear_axle.stl | 46.3KB | |
| 23_wheel_locomotive_smaller_rear_print_2_pieces.stl | 77.4KB | |
| Fixture_wheels_90_degrees_to_the_axis.stl | 13.4KB | |
| vagnl_axel_01.stl | 2.6KB | |
| wagon_floor_with_coal_and_barrel_holderV_05.stl | 37.4KB | |
| wagon_long_side__right______________V_09_ny.rsdoc.stl | 286.4KB | |
| wagon_long_side___left____________V_09_ny.rsdoc.stl | 285.9KB | |
| wagon_shaft_print_2_pcs_____vagn_hjul_axel_50mm_lng_4mm_39.stl | 684.0B | |
| wagon_short_side_high____Vagn_kortnda_hgV09_ny_kolvagn.stl | 68.1KB | |
| wagon_short_side_low______Vagn_kort_kortnda_lgV09_ny_kolvagn.stl | 54.8KB | |
| wagon_wheels_print_4_pcs______vagn_hjul_03.stl | 160.3KB | |
| wagon__water_barrel02.stl | 264.0KB |
