(OPENSCAD SOURCE INCLUDED)
Hold your work piece down on Shapeoko 2 threaded insert wasteboard. There are three sizes, Small, Med and Large. You can edit the parameters in the openscad source and generate custom versions too!!
I modeled these from a set of commercial ones used on my Milling Machine.
https://www.inventables.com/technologies/waste-board-with-threaded-inserts#30300-03
| Model.stl | 135.4KB | |
| Step_Blocks.scad | 3.4KB | |
| Step_Blocks_-_Large.stl | 163.1KB | |
| Step_Blocks_-_Med.stl | 23.9KB | |
| Step_Blocks_-_Small.stl | 19.2KB | |
| Step_Blocks_100mm_with_Cut_Nose.stl | 118.6KB | |
| Step_Blocks_120mm_with_Cut_Nose.stl | 118.8KB | |
| Step_Blocks_60mm_with_Cut_Nose.stl | 118.7KB | |
| Step_Blocks_80mm_with_Cut_Nose.stl | 118.6KB |
