Steno Style Keycaps For Kailh Choc V1 Low Profile Switches 3D Printer Model
The file 'Steno Style Keycaps For Kailh Choc V1 Low Profile Switches 3D Printer Model' is (FCStd,step,stl) file type, size is 228.5KB.
The file 'Steno Style Keycaps For Kailh Choc V1 Low Profile Switches 3D Printer Model' is (FCStd,step,stl) file type, size is 228.5KB.
Steno style keycaps for use on keyboards with Kailh Choc v1 switches. Not tested yet, will try on my Corne later. STEP and FreeCAD files included so you can easily edit and tweak the design.
Please note that these keycaps were designed with standard (19.05mm) switch spacing in mind and are based off my previous keycap design, which I tested on Corne keyboard. From what I've read, there are some very compact keyboards that use tighter spacing and it's likely that you'd have to change the keycap dimensions to fit on such keyboards.
Depending on your printing orientation and settings, the parts may end up slightly bigger than expected, don't fill your print bed with keycaps right away, I'd recommend printing 2 or 3 columns at most for a fitting test before commiting to a whole-keyboard print.
update 2024-05-06: added alternative keys for thumb cluster, normal, rotated, wider, wider+rotated, for the corne thumb cluster. You can see the wider thumb keys on the left side of the pictured corne, not a huge difference, maybe I can try slightly wider thumb keys later.
| Steno_alt_thumb.FCStd | 98.2KB | |
| Steno_alt_thumb.step | 116.2KB | |
| Steno_alt_thumb.stl | 36.0KB | |
| Steno_Keycaps.FCStd | 69.5KB | |
| Steno_Keycaps.step | 79.4KB | |
| Steno_Keycaps.stl | 85.4KB |
