“Steins;Gate” Upa 3D Printer Model
The file '“Steins;Gate” Upa 3D Printer Model' is (stl) file type, size is 9.1 MB.
The file '“Steins;Gate” Upa 3D Printer Model' is (stl) file type, size is 9.1 MB.
Upa from the anime series Steins;Gate.
I've designed this in many parts so they can be printed in different colours and each part is optimised for 3d printing. I actually painted mine but if printed in different colours the only part that will need painting is the inside of the ears.
I've included the whole Upa but haven't tried printing it so don't know how well that will work.
At this scale it's a bit tricky to print but I think worth the effort.
The head and trousers are split into two parts that then need gluing or acetone welding together. I actually printed it in PLA and chemically welded the parts.
Both are included whole but will need support to print.
All the other parts kind of hold each other together but will probably need gluing.
The feet need a lot of support, I enforce the support for about half the height.
You need to print two of the belt piece and glue together. The support can be easily snapped out if you want.
For all the really small parts I find printing loads of them at once helps because each part has time to cool before the next layer, also you'll be more likely get a few decent parts out of all the prints.
| belt_half_support.stl |
| ear_inner_plug.stl |
| ear_left_plug.stl |
| ear_right_plug.stl |
| eye_ring.stl |
| foot_front_left_plug.stl |
| foot_front_right_plug.stl |
| foot_rear_left_plug.stl |
| foot_rear_right_plug.stl |
| head_whole.stl |
| nose.stl |
| nose_longer.stl |
| pupil.stl |
| pupil_longer.stl |
| tail_2parts.stl |
| tear_left.stl |
| tear_right.stl |
| trousers_bottom_plugs.stl |
| trousers_top_plugs.stl |
| trousers_whole.stl |
| upa_head_bottom.stl |
| upa_head_top.stl |
| upa_whole.stl |
| upa_whole_new.stl |
