SteamVR Base Station Kallax Mount 3D Printer Model
The file 'SteamVR Base Station Kallax Mount 3D Printer Model' is (stl) file type, size is 25.5KB.
The file 'SteamVR Base Station Kallax Mount 3D Printer Model' is (stl) file type, size is 25.5KB.
This part allows a SteamVR base station / lighthouse to be mounted to the top of a Kallax using the Kallax's screws. The base station will point down at a 35 degree angle. To install, use one of your Kallax's top screws to fasten the mount to the Kallax. Then, use a 1/4"-20 x 3/8" bolt to attach the base station to the mount.
I recommend printing this part at 100% infill and flat on its side - no supports were needed.
| kallax_base_station_mount.stl | 90.7KB |
