Steampunk USB Flash Drive – (Vacuum Tube) 3D Printer Model
The file 'Steampunk USB Flash Drive – (Vacuum Tube) 3D Printer Model' is (stl,FCStd) file type, size is 3.5MB.
The file 'Steampunk USB Flash Drive – (Vacuum Tube) 3D Printer Model' is (stl,FCStd) file type, size is 3.5MB.
But where does the water go?..
This Steampunk themed Vacuum Tube USB thumb drive glows a soft light when inserted into the base.
I tried to make the base modular so you could maybe design something in place of the gear ring .. who knows
The important part is the female receptacle and could easily be added to another project using a simple hole to mount, as long as you have enough room to work on the wiring.. oh yes don't forget the wiring .. this will challenge most people when it comes to removing the usb bits from the flash drive and soldering the wires ..
find you a standard USB 2.0 pin out chart on google there every where.
| Materials | Count |
|---|---|
| #4 x 1/2" self tapping screws | 17 |
| #4 x 1/4" self tapping screws | 1 |
| USB A Male to A Female cable | 1 |
| Female 22-18 .110 spade quick connects | 7 |
| Male 22-18 .110 spade quick connects | 7 |
| Acrylic Tube 1 1/4" x 1" x 2" long | 1 |
| USB Thumb Drive 1gig | 1 |
| 4" length Cat5e cable | 1 |
| Super glue or Model glue | 1 |
| 5mm LED color of your choice | 1 |
| 470 ohm resistor | 1 |
| Base1.stl | 162.8KB | |
| Base2.stl | 33.5KB | |
| Base3.stl | 67.7KB | |
| Base4.stl | 100.1KB | |
| Base5.stl | 78.0KB | |
| Base6.stl | 103.3KB | |
| Base7.stl | 4.5KB | |
| Base8.stl | 107.5KB | |
| female-socket.FCStd | 2.9MB | |
| male-socket.FCStd | 1.2MB | |
| Tube-Bottom-2.1.stl | 156.1KB | |
| Tube-Bottom-2.2.stl | 90.8KB | |
| Tube-Bottom1.1.stl | 149.5KB | |
| Tube-Bottom1.2.stl | 120.6KB | |
| Tube-Bottom3.stl | 11.6KB | |
| Tube-Cap1.stl | 95.9KB | |
| Tube-Cap2.stl | 127.6KB |
