Steampunk Radio 3D Printer Model
The file 'Steampunk Radio 3D Printer Model' is (stl,zip) file type, size is 27.2MB.
The file 'Steampunk Radio 3D Printer Model' is (stl,zip) file type, size is 27.2MB.
Steampunk Case for Internet Radio.
Electronic is based on Edzelf's ESP32-Radio:
https://github.com/Edzelf/ESP32-Radio
The Plasma Disc can be bought on different shops for approx. 15 Euro
The Plasma Tube on the right is just powered by a green LED in a body printed in transparent Filament.
The front plate is made of 9mm Cedar wood.
The pipes are made of 3,5mm copper wire (removed isolation of grounding wire)
| Back_L.stl | 90.1KB | |
| Back_R.stl | 223.9KB | |
| Cap-WLevel.stl | 243.4KB | |
| Case_left.stl | 825.0KB | |
| Case_right.stl | 2.7MB | |
| Discframe2.stl | 15.8MB | |
| Framemount.stl | 110.9KB | |
| Handwheel1.stl | 5.5MB | |
| Handwheel2.stl | 9.7MB | |
| Klammer2.stl | 19.4KB | |
| Klammer3.stl | 19.4KB | |
| LCDframe.stl | 881.7KB | |
| Plasma-Cap.stl | 2.4MB | |
| Plasmabody.stl | 8.4MB | |
| Steampunk_Radio.zip | 15.7MB | |
| Toggle-Button-Base.stl | 105.9KB | |
| Toggle-Button.stl | 65.3KB | |
| Watchcase.stl | 1.7MB | |
| Watchcase_Back.stl | 634.5KB |
