This is complete remake of original design:
https://www.thingiverse.com/thing:2805852
I did it because dimensions and buttons position on the module from Aliexpress are different. From this reason I copy very nice front frame and make my own steampunk design. All parts are sticked by super glue or fixed by bolts. For module installation inside the box you use module bolts and connecting material.
Used designs:
https://www.thingiverse.com/thing:2805852
https://www.thingiverse.com/thing:2094281
Used Nixie tube electronic kit:
https://www.aliexpress.com/item/4000050481525.html?spm=a2g0s.9042311.0.0.27424c4dZT9qX8
Used Nixie tubes:
Russian model IN12 from Aukro
Bolts:
M2,5x8 - 22x
M4x10 - 12x
M4 nuts - 12x
Used filament:
PLA from PM
Colors: Cooper, Gold, Pearl Red, Red, Green, Beige
| Nixie_SteamPunk_Body.stl | 992.9KB | |
| Nixie_SteamPunk_Button.stl | 9.6KB | |
| Nixie_SteamPunk_Exhost_cup.stl | 56.2KB | |
| Nixie_SteamPunk_Exhost_Elbow.stl | 122.2KB | |
| Nixie_SteamPunk_Exhost_Fitting.stl | 39.5KB | |
| Nixie_SteamPunk_Exhost_Tube.stl | 12.4KB | |
| Nixie_SteamPunk_Front_Frame.stl | 1014.5KB | |
| Nixie_SteamPunk_Gauge.stl | 173.3KB | |
| Nixie_SteamPunk_Gauge_Elbow.stl | 122.2KB | |
| Nixie_SteamPunk_Gauge_Fitting.stl | 51.8KB | |
| Nixie_SteamPunk_Gauge_Joint.stl | 13.9KB | |
| Nixie_SteamPunk_Gauge_Ring.stl | 280.6KB | |
| Nixie_SteamPunk_Gauge_Tube.stl | 12.4KB | |
| Nixie_SteamPunk_Left_Cover.stl | 47.7KB | |
| Nixie_SteamPunk_Left_Cover_Holder.stl | 46.8KB | |
| Nixie_SteamPunk_Right_Cover.stl | 84.5KB | |
| Nixie_SteamPunk_Valve.stl | 161.2KB | |
| Nixie_SteamPunk_Valve_Elbow.stl | 122.2KB | |
| Nixie_SteamPunk_Valve_Fitting.stl | 39.8KB | |
| Nixie_SteamPunk_Valve_Handle.stl | 889.6KB | |
| Nixie_SteamPunk_Valve_Pipe.stl | 12.4KB |
