Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Steel Grey Transmission Distance: 1
PLA Overture Matte White Transmission Distance: 3.7
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Charcoal Black
At layer #9 (0.8mm) swap to Steel Grey
At layer #13 (1.12mm) swap to White
At layer #18 (1.52mm) swap to Jade White for the rest.
| Steampunk_City_Front_200x200.stl | 95.9MB |
