Stealth Air Fighter 3D Printer Model
The file 'Stealth Air Fighter 3D Printer Model' is (stl) file type, size is 39.9MB.
The file 'Stealth Air Fighter 3D Printer Model' is (stl) file type, size is 39.9MB.
Printable Aircraft Model
Assembly is required.
Assemble instruction is in my youtube channel
https://youtu.be/_nTfZWFR-nE
The parts are designed and tested to fit each other, however the tolerance is depends on a 3d-printer's condition.
Please remove the supports completely. May need a sandpaper or cutter while assemble the parts.
Use a raw 1.75mm filament and super glue while assemble the parts.
Layer height:
0.10mm : All the Rest
0.18mm : Body, LandingGearCover, EngineCover.STL
Shell count: 3
Fill density:
15%~20%
Time to do: about 950 - 1100 minutes
Technology: FDM
Material: PLA
Dimensions: about 155mm x 140mm x 29mm
Material Quantity: about 95g
| Body.stl | 36.8MB | |
| Canopy_01.stl | 597.0KB | |
| Canopy_02.stl | 1.1MB | |
| Cockpit.stl | 2.2MB | |
| Drone_Module_01.stl | 105.0KB | |
| Drone_Module_02.stl | 335.2KB | |
| Engine_Cover_Left.stl | 1.6MB | |
| Engine_Cover_Right.stl | 1.6MB | |
| LandingGearCover_Front_Closed.stl | 114.1KB | |
| LandingGearCover_Front_Opened.stl | 151.5KB | |
| LandingGearCover_Left_Closed.stl | 394.7KB | |
| LandingGearCover_Left_Opened.stl | 782.9KB | |
| LandingGearCover_Right_Closed.stl | 394.7KB | |
| LandingGearCover_Right_Opened.stl | 783.3KB | |
| LandingGear_Front.stl | 3.0MB | |
| LandingGear_Left.stl | 2.7MB | |
| LandingGear_Right.stl | 2.7MB | |
| Left_Engine.stl | 14.7MB | |
| Left_Flap.stl | 2.1MB | |
| Left_VerticlalStabilizer_01.stl | 1.6MB | |
| Left_VerticlalStabilizer_02.stl | 999.1KB | |
| Left_VerticlalStabilizer_03.stl | 311.9KB | |
| MissileBay_01.stl | 255.9KB | |
| MissileBay_02.stl | 13.4KB | |
| MissileBay_03.stl | 793.4KB | |
| MissileBay_Missile_01_x6.stl | 1.4MB | |
| MissileBay_Missile_02.stl | 1.1MB | |
| Nozzle_body.stl | 9.2MB | |
| Nozzle_Lower_Left.stl | 746.5KB | |
| Nozzle_Lower_Right.stl | 746.5KB | |
| Nozzle_Upper_Left.stl | 798.1KB | |
| Nozzle_Upper_Right.stl | 798.5KB | |
| Right_Engine.stl | 14.8MB | |
| Right_Flap.stl | 2.1MB | |
| Right_VerticlalStabilizer_01.stl | 1.6MB | |
| Right_VerticlalStabilizer_02.stl | 999.7KB | |
| Right_VerticlalStabilizer_03.stl | 311.9KB | |
| Stand_Base_01.stl | 288.0KB | |
| Stand_Base_02.stl | 559.1KB | |
| Stand_Base_03.stl | 1.5MB |
