The file 'Statue Of Liberty – Selfie 3D Printer Model' is (gcode,3mf,stl) file type, size is 42.4MB.
Lady Liberty taking a selfie ;)
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm
Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below.
Filaments Used:
PLA SPARKLE BambuLab Slate Gray Sparkle Transmission Distance: 1
PLA BambuLab Matte Ash Gray Transmission Distance: 8
PLA BambuLab Matte Desert Tan Transmission Distance: 9
PLA BambuLab Basic Jade White Transmission Distance: 1
Swap Instructions:
Start with Slate Gray Sparkle
At layer #5 (1.12mm) swap to Ash Gray
At layer #14 (2.92mm) swap to Desert Tan
At layer #18 (3.72mm) swap to Jade White for the rest.
If you want to resize the print, DO NOT change the Z axis.
Happy printing, and share your make!
| Selfie_PLA_3h54m.gcode | 22.4MB | |
| Statue_of_Liberty_-_Selfie_by_TheMazePrinter.3mf | 19.5MB | |
| Statue_of_Liberty_-_Selfie_by_TheMazePrinter.stl | 95.4MB |
