The file 'Statue Of Liberty – Breaking Bad 3D Printer Model' is (gcode,3mf,stl) file type, size is 50.1MB.
Lady Liberty in the lab doing some business :>
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm
Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below.
Filaments Used:
PLA SPARKLE BambuLab Slate Gray Sparkle Transmission Distance: 1
PLA BambuLab Matte Marine Blue Transmission Distance: 15
PLA BambuLab Matte Lemon Yellow Transmission Distance: 15
PLA BambuLab Basic Jade White Transmission Distance: 1
Swap Instructions:
Start with Slate Gray Sparkle
At layer #5 (1.12mm) swap to Marine Blue
At layer #8 (1.72mm) swap to Lemon Yellow
At layer #14 (2.92mm) swap to Jade White for the rest.
If you want to resize the print, DO NOT change the Z axis.
Happy printing, and share your make!
| Breaking_Bad_PLA_3h47m.gcode | 24.4MB | |
| Statue_of_Liberty_-_Breaking_Bad_by_TheMazePrinter.3mf | 20.6MB | |
| Statue_of_Liberty_-_Breaking_Bad_by_TheMazePrinter.stl | 95.4MB |
![Labornetzteil [Laboratory Power Supply] [DPS3012] 3D Printer Model](https://cdn.3axis.co/assets/48/91/c8/a7/4891c8a7-a7a8-473c-8801-f71f132a0c46/images/1aa40fbe-3ed2-48e6-b13b-15834ffed437_thumb.jpg)
