~18cm tall Stationeers H.E.M. Droids (assembled).
https://store.steampowered.com/app/544550/Stationeers/
Hollow heads for wireless LEDs for example.
This is an unofficial fan work and is not approved/endorsed by RocketWerkz
DECALS
I added a .png for water transfer decals using a regular inkjet printer and white water transfer foil. I recommend printing at least 3-4 slightly different scales with multiple duplicates per page. Don't forget to mirror them before printing onto the foil! Two of the original models can be found here for reference: https://sketchfab.com/3d-models/stationeers-hem-droids-9f54a7f972ea4627a41d36b5042ebdc7
3D PRINTING SETTINGS
Printing with tough resin is recommended (I tested generic resin but elbows on the lower arms snapped when I clicked them in... not hard to repair even after painting but rather annoying). Make sure to wash the joint cavities properly as any leftover resin will block movement especially at the hip.
FDM printing might work for you but will require experience with custom supports and part orientation for good results (tolerances may vary depending on your extrusion settings).
Don't miss out on this cool rover from the original artist:
https://www.thingiverse.com/thing:3973100
Got ideas, questions or need changes? Let me know...
Tip-Jar:
https://www.paypal.com/paypalme/wikus
| Chest.stl | 11.0MB | |
| Feet_L.stl | 4.6MB | |
| Feet_R.stl | 4.6MB | |
| Forearm_L.stl | 3.7MB | |
| Forearm_R.stl | 3.7MB | |
| Hand_L.stl | 6.1MB | |
| Hand_R.stl | 6.1MB | |
| Head_1_1.stl | 39.1MB | |
| Head_1_2.stl | 742.0KB | |
| Head_1_3_L.stl | 1.0MB | |
| Head_1_3_R.stl | 1.0MB | |
| Head_2_1.stl | 16.5MB | |
| Head_2_2.stl | 525.5KB | |
| Head_3_1.stl | 14.2MB | |
| Head_3_2.stl | 3.2MB | |
| Head_3_3.stl | 3.0MB | |
| Neck_1.stl | 5.3MB | |
| Neck_2.stl | 23.5MB | |
| Neck_3.stl | 8.7MB | |
| Pelvis.stl | 13.1MB | |
| Shoulder_L.stl | 1.0MB | |
| Shoulder_R.stl | 1.0MB | |
| Thigh_L.stl | 3.5MB | |
| Thigh_R.stl | 3.5MB | |
| Upper_Arm_L.stl | 3.3MB | |
| Upper_Arm_R.stl | 3.3MB |
