Station G2 Case And Battery Holder 3D Printer Model
The file 'Station G2 Case And Battery Holder 3D Printer Model' is (STL) file type, size is 236.3KB.
The file 'Station G2 Case And Battery Holder 3D Printer Model' is (STL) file type, size is 236.3KB.
I designed this case for the Station G2 Meshtastic radio to add some protection, as well as an attachable battery case for the popular VEEKTOMX 10000mah battery bank. The battery case also has slots sized to allow for adding straps and mounting on any MOLLE surface such as a backpack (see pic).
Recommend printing the cases in TPU to allow for some flexibility in the fit.
I designed the case relief around this ribbon cable: https://www.amazon.com/chenyang-Degree-Angled-Charge-Extension/dp/B0D22Q8CYK
Hardware Required
Plastic M3 nuts to replace the cap nuts that come with the Station G2
Both covers use M2 x 12 screws to attach
Battery case attaches with M3 x 8 screws and M3 nuts squished into the case bottom
| station-g2-battery-case-cover.STL | 134.7KB | |
| station-g2-battery-case.STL | 267.9KB | |
| station-g2-case-cover.STL | 65.1KB | |
| station-g2-case-v2.STL | 447.5KB |
