STARWARS ACTION FIGURE STAND 3D Printer Model
The file 'STARWARS ACTION FIGURE STAND 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'STARWARS ACTION FIGURE STAND 3D Printer Model' is (stl) file type, size is 1.2MB.
My kids wanted stands for their Starwars action figures because they kept tipping over. I planned on just making some simple stands but my son really wanted the rebel or empire symbol on them so I put it on the base. He was not happy with that, he wanted it displayed a lot bigger behind the character. I thought it was a bad idea but I did it anyways to make him happy and in the end it turned out looking pretty good!
Print out the base and insert a 3/32" diameter. x 1/2" long dowel pin in to the hole to hold the action figure in place. You can add super glue to the pin if you have any issues with it falling out. I purchased the dowel pins at a local hardware store but they could also be found here:
https://www.mcmaster.com/#98381a438/=16m0xvo
The symbol simply inserts in to the slot in the back of the stand. The end is tapered so it locks into place pretty well but if you have any issues with it coming out just add super glue. I made a version without the symbol slot as well.
| SW_AFS-GALACTIC_EMPIRE.stl | 414.4KB | |
| SW_AFS-NO_SYMBOL.stl | 384.1KB | |
| SW_AFS-REBEL_ALLIANCE.stl | 356.8KB | |
| SYMBOL-GALACTIC_EMPIRE.stl | 1.3MB | |
| SYMBOL-REBEL_ALLIANCE.stl | 1.2MB |
