Stark ‘s Axe – Sousou No Frieren (Frieren: Beyond Journey’s End) – FDM 3D Printer Model
The file 'Stark ‘s Axe – Sousou No Frieren (Frieren: Beyond Journey’s End) – FDM 3D Printer Model' is (stl) file type, size is 1.6MB.
The file 'Stark ‘s Axe – Sousou No Frieren (Frieren: Beyond Journey’s End) – FDM 3D Printer Model' is (stl) file type, size is 1.6MB.
Stark's Axe
These parts fit onto a schedule 40 1" PVC Pipe.
The seven small alignment pins and 2 large axe head threads should be printed lengthwise for maximum strength (I use 6mmx50mm wooden dowels bought off of Amazon).
It is suggested that the load bearing parts (mainly the AxeCenter & AxeHeadAttachment) be printed with many perimeters and a high % infill.
AxeHeadAlignmentPin x 7
AxeHeadAttachment x 2
Everything else, print out once.
| Axe1.stl | 457.8KB | |
| Axe2.stl | 449.0KB | |
| Axe3.stl | 581.0KB | |
| Axe4.stl | 584.4KB | |
| AxeCenter_Bottom.stl | 478.4KB | |
| AxeCenter_Top.stl | 1.7MB | |
| AxeEnd_Bottom.stl | 249.5KB | |
| AxeEnd_Top.stl | 153.5KB | |
| AxeHeadAlignmentPin.stl | 82.6KB | |
| AxeHeadAttachment.stl | 80.0KB | |
| Axe_Tip.stl | 1.1MB | |
| Spike.stl | 2.4KB |
![[O-SD 005] GAT-02L2 Dagger L 3D Printer Model](https://cdn.3axis.co/assets/78/64/11/10/78641110-eb5c-4468-8b5b-8cb7c601fb00/images/1d7068aa-83d7-4112-bf4e-3c9c45257fd6_thumb.jpg)
