This is my model of the Stargate in the SGC pedestal. The model is printable without any support material and could be assembled as a lego - no need for a glue. The inner ring of the gate could rotate and it has teeths while the pedestal has a gear, thus it has a feature to rotate the the inner ring.
The model is completely modelled by me, as are all my 3D printed project. Note - few models may have quite a lot of tolerance between each other. That is on purpose, to conpensate the additional layer of paint.
For more info and videos, take a look at my YT playlist:
https://www.youtube.com/watch?v=b_OX3hSLzyY&list=PLyHwaiEHdyZqXt_kSdykixoQ6ZZFug8Kk
| gate_10_9x.stl | 1.3MB | |
| gate_1_1x.stl | 2.6MB | |
| gate_2_1x.stl | 3.0MB | |
| gate_3_9x.stl | 17.7KB | |
| gate_4_9x.stl | 52.9KB | |
| gate_5_9x.stl | 43.0KB | |
| gate_6_1x.stl | 1.9MB | |
| gate_7_9x.stl | 32.5KB | |
| gate_8_9x.stl | 11.6KB | |
| gate_9_9x.stl | 1.1MB | |
| sgc_10_1x.stl | 123.5KB | |
| sgc_11_1x.stl | 35.4KB | |
| sgc_12_1x.stl | 53.0KB | |
| sgc_13_1x.stl | 43.1KB | |
| sgc_14_2x.stl | 2.4KB | |
| sgc_15_4x.stl | 12.4KB | |
| sgc_16_2x.stl | 29.4KB | |
| sgc_17_2x.stl | 29.2KB | |
| sgc_18_1x.stl | 25.3KB | |
| sgc_19_2x.stl | 22.7KB | |
| sgc_1_1x.stl | 65.9KB | |
| sgc_20_2x.stl | 22.7KB | |
| sgc_21_2x.stl | 8.1KB | |
| sgc_22_2x.stl | 6.7KB | |
| sgc_23_2x.stl | 47.9KB | |
| sgc_24_2x.stl | 108.5KB | |
| sgc_25_2x.stl | 108.5KB | |
| sgc_26_12x.stl | 31.3KB | |
| sgc_27_2x.stl | 113.2KB | |
| sgc_28_4x.stl | 29.4KB | |
| sgc_29_4x.stl | 103.2KB | |
| sgc_2_1x.stl | 65.9KB | |
| sgc_30_4x.stl | 71.6KB | |
| sgc_31_6x.stl | 16.7KB | |
| sgc_32_8x.stl | 6.3KB | |
| sgc_33_2x.stl | 60.6KB | |
| sgc_34_6x.stl | 16.7KB | |
| sgc_35_1x.stl | 11.6KB | |
| sgc_36_1x.stl | 15.7KB | |
| sgc_37_1x.stl | 15.7KB | |
| sgc_38_1x.stl | 5.6KB | |
| sgc_39_2x.stl | 183.5KB | |
| sgc_3_1x.stl | 12.2KB | |
| sgc_40_2x.stl | 17.9KB | |
| sgc_41a_2x.stl | 27.0KB | |
| sgc_41_2x.stl | 27.0KB | |
| sgc_42_4x.stl | 88.2KB | |
| sgc_43_8x.stl | 57.7KB | |
| sgc_44_4x.stl | 6.2KB | |
| sgc_45_4x.stl | 6.2KB | |
| sgc_46_8x.stl | 2.2KB | |
| sgc_4_1x.stl | 116.9KB | |
| sgc_5_1x.stl | 173.1KB | |
| sgc_6_1x.stl | 348.7KB | |
| sgc_7_2x.stl | 74.3KB | |
| sgc_8_2x.stl | 73.4KB | |
| sgc_9_2x.stl | 73.4KB |
