Stargate Bookends 3D Printer Model
The file 'Stargate Bookends 3D Printer Model' is (stl) file type, size is 10.4MB.
The file 'Stargate Bookends 3D Printer Model' is (stl) file type, size is 10.4MB.
#######################UPDATE#######################
I have been informed that the file g1-gate.stl is none-manifold.
I have now corrected this and uploaded the new file.
Sorry for the inconvenience.
This project follows on from my Walking Dead bookends and was designed as a birthday gift for my sister in-law who is a big fan of the show.
As always I used a variety of infills depending on the part being printed. Some parts also require a brim and others supports, in some cases both.
Although I was happy with my initial design and print, I found that it had far too many small parts and was too difficult to put together. I decided to go back to the drawing board and redesign.
The pictures and stl files shown here are the new simplified versions. I had to compromise on some of the parts and some of the original detail that I added has now been lost, but I still think it is an effective model.
| g1_base.stl | 20.6KB | |
| g1_carter.stl | 235.0KB | |
| g1_gate.stl | 32.8MB | |
| g1_gate_stand.stl | 2.4MB | |
| g1_lights.stl | 6.6KB | |
| g1_new_frame_single_1.stl | 141.5KB | |
| g1_new_frame_single_2.stl | 144.0KB | |
| g1_oneil1.stl | 210.1KB | |
| g1_ramp.stl | 5.2MB | |
| g1_steps.stl | 19.0KB | |
| g1_tealc.stl | 223.9KB | |
| g2_base2.stl | 172.1KB | |
| g2_daniel.stl | 291.0KB | |
| g2_DHD_base.stl | 227.8KB | |
| g2_DHD_top.stl | 700.6KB | |
| g2_gate2.stl | 31.3MB | |
| g2_oneil2.stl | 268.5KB |
