Stargate Base 3D Printer Model
The file 'Stargate Base 3D Printer Model' is (stl) file type, size is 10.8MB.
The file 'Stargate Base 3D Printer Model' is (stl) file type, size is 10.8MB.
I liked this halve of my original bookends model so much, I thought I would remix it as a standalone model. Although I have used some elements from the original, most of the model needed to be completely remodel.
As with my original I printed with an infill of 30% on the larger pieces and 70% on the smaller.
The smaller parts also needed a brim to help secure them to the bed and I left supports active for the entire print just in case they were needed.
Some parts needed a little work to make them fit properly before assembly.
The model was glued together with standard super glue, painted with acrylics and finished with a protective clear coat.
| base.stl | 3.6MB | |
| base_plain.stl | 1.5MB | |
| frames.stl | 398.0KB | |
| g1_steps.stl | 19.0KB | |
| gate_back.stl | 30.5MB | |
| gate_front.stl | 32.0MB | |
| gate_platform_back.stl | 1.5MB | |
| gate_stands.stl | 4.9MB | |
| ramp.stl | 5.1MB |
