Star Wars Turbo Tank/A6 Juggernaut 3D Printer Model

Author: @
License: CC BY
File formats: stl
Download type: zip
Size:1.8MB

The file 'Star Wars Turbo Tank/A6 Juggernaut 3D Printer Model' is (stl) file type, size is 1.8MB.

Summary

Large scale turbo tank from star wars 450 mm long when assembled. will post pics once I have one 100% finished.made it so it can be printed on a small bed.prints really well.

The A6 Juggernaut model was larger than its predecessor. It measured 30.4 meters in height and 49.4 meters in length. Its interior space was greatly increased to allow for up to three hundred troopers and equipment, a complement of close support craft such as speeder bikes and light airspeeders, or a mix of both. A combination of twelve crew members were required to pilot and control the massive vehicle, although with an automation package, that requirement could be reduced to just two pilots.

With thick, thermally superconducting armor (capable of absorbing enemy fire and dispersing heat over a wide area) and a heavier load, the A6 Juggernaut could only achieve 160 kilometers per hour, and the turning issues of the A5 model were magnified with the A6. The slowness required for negotiating turns encouraged the A6's use on open terrain rather than urban battlefields.

turbo_tank_body_back.stl 168.0KB
turbo_tank_body_front.stl 171.7KB
turbo_tank_bottom_front.stl 178.9KB
turbo_tank_bottom_full.stl 945.9KB
turbo_tank_bottom_middle.stl 294.0KB
turbo_tank_bottom_rear.stl 475.0KB
turbo_tank_cannon.stl 207.5KB
turbo_tank_front_bumper.stl 77.1KB
turbo_tank_front_bumper_bottom.stl 253.4KB
turbo_tank_front_cab.stl 548.7KB
turbo_tank_front_turret.stl 226.6KB
turbo_tank_imperial_logo.stl 88.9KB
turbo_tank_main_body_full.stl 485.8KB
turbo_tank_mid_section.stl 557.8KB
turbo_tank_rear_turret.stl 87.5KB
turbo_tank_side_cannon.stl 209.7KB
turbo_tank_wheel.stl 182.7KB
turbo_tank_wheel_axle.stl 3.8KB
turbo_tank_wheel_iner_rim.stl 29.0KB
turbo_tank_wheel_outer_rim.stl 31.3KB
turbo_tank_windows.stl 5.7KB