Star Wars Storage Cylinder 3D Printer Model
The file 'Star Wars Storage Cylinder 3D Printer Model' is (stl) file type, size is 568.6KB.
The file 'Star Wars Storage Cylinder 3D Printer Model' is (stl) file type, size is 568.6KB.
This is a Star Wars themed storage cylinder I designed to go on a pack. It has a diameter of 15cm and a length of 23cm. You need to print two lids to go on either side of the cylinder. The threads work if you have your printer dialed in correctly. If not, the threads are large enough, that you can sand/dremel them down easily, till it fits. I provided two versions of the cylinder. One bare, and one with slots for internal lighting, if you desire to venture into that. The lids also have slots for internal illumination if you wish. I have also provided a model for a window, that goes over the cylinder slots. I printed them in translucent filament and it looks amazing. If you're not going to put any lighting, you could also print the windows in glow in the dark filament, or any solid color to your liking. You will need to print 17 windows to cover all the slots.
PS. The design for the lids was inspired from the large vault door to the mines in The Bad Batch season 2 episode 9. Leave a comment on what you think.
| Storage_Cylinder_Slot_Window_v8.stl | 4.0KB | |
| Storage_Cylinder_v1.stl | 318.5KB | |
| Storage_Cylinder_v4.stl | 644.1KB | |
| Storage_Lid_v2.stl | 504.7KB |
