The file 'Star Wars Logo 3D Printer Model' is (stl,dxf,svg,fcstd) file type, size is 3.8MB.
After the FPGA Wars alternative design: http://www.thingiverse.com/thing:1987537 some people ask me for the original Star Wars design.
This design is formed by two divided pieces. Perfect for geek's houses!
You will need black and yellow filament (or just use acrylic paint). I used the "stop at height" Cura plugin to change the filament to yellow. With the original file I reccomend to stop at height 27 mm (with a total height of 30 mm)
UPDATE: You can also use the split versions, just print the bottom part in brack and the upper part in yellow and glue it together.
The result in my opinion is very cool, hope you like it!
| star-split-bottom-black.stl | 62.6KB | |
| star-split-up-yellow.stl | 62.0KB | |
| STAR.stl | 173.7KB | |
| starwars.dxf | 101.6KB | |
| starwars.svg | 72.7KB | |
| starwarslogo.fcstd | 3.5MB | |
| wars-split-bottom-black.stl | 75.4KB | |
| wars-split-bottom-yellow.stl | 75.6KB | |
| WARS.stl | 426.1KB |
