Star Wars JT-12 Jetpack 3D Printer Model
The file 'Star Wars JT-12 Jetpack 3D Printer Model' is (3mf,stl) file type, size is 6.9MB.
The file 'Star Wars JT-12 Jetpack 3D Printer Model' is (3mf,stl) file type, size is 6.9MB.
http://starwars.wikia.com/wiki/JT-12_jetpack
this is a jetpack that i got from "Jace1969" that i smoothed, split into pieces ready to 3D print, and i hollowed out the interior while making the missile detachable so that when someone wears it they can store essentials in the middle tube, i used magnets to hold the missile in place so that i could easily take it off and put it back on. i am currently printing it with no problems and i will post pictures when i am done
| jetpack_backpack.3mf | 1.4MB | |
| jetpack_backpack_complete.stl | 6.9MB | |
| jp_b_1.stl | 7.9KB | |
| jp_b_10.stl | 18.4KB | |
| jp_b_2.stl | 22.5KB | |
| jp_b_3.stl | 10.9KB | |
| jp_b_4.stl | 30.9KB | |
| jp_b_5.stl | 36.1KB | |
| jp_b_6.stl | 28.0KB | |
| jp_b_7.stl | 20.4KB | |
| jp_b_8.stl | 23.6KB | |
| jp_b_9.stl | 18.1KB | |
| jp_exhausts.stl | 2.6MB | |
| jp_L_1.stl | 23.8KB | |
| jp_L_2.stl | 19.8KB | |
| jp_L_3.stl | 37.3KB | |
| jp_L_4.stl | 27.3KB | |
| jp_m_1.stl | 1.0MB | |
| jp_m_2.stl | 581.1KB | |
| jp_m_3.stl | 266.8KB | |
| jp_m_4.stl | 207.8KB | |
| jp_m_5.stl | 90.6KB | |
| jp_m_6.stl | 71.6KB | |
| jp_R_1.stl | 60.3KB | |
| jp_R_2.stl | 22.2KB | |
| jp_R_3.stl | 38.1KB | |
| jp_R_4.stl | 30.4KB | |
| jp_tops.stl | 1.8MB | |
| missle.stl | 28.9KB |
