Star Wars Imperial Binders 3D Printer Model
The file 'Star Wars Imperial Binders 3D Printer Model' is (stl) file type, size is 21.1MB.
The file 'Star Wars Imperial Binders 3D Printer Model' is (stl) file type, size is 21.1MB.
UPDATE: 3 Options available.
Binders1 is meant to be a one piece print with a built-in hinge. Not sure how well that works in some prints - but those with support materials should be fine (like the one I use most Objet24)
(Untested) Binders2 has the parts needed to assemble together to make a complete Binders. So with a hinge pin to be glued in.
Plus for convenience, I have now included the 3 parts that are used to make the Binders as well.
You will need to put foam inside for comfort of the "prisoners" - I planned for 1" thick soft black.
There are holes in the "clasp" area to glue in std 2mm Dia x 3mm magnets to hold it closed. (http://bit.ly/1RZ2hbG) ... or drill it to fit 3x3 magnets (http://bit.ly/1mbuUnO)
(feel free to give tip$)
| binders-pin.stl | 305.6KB | |
| binders1.stl | 36.9MB | |
| binders2.stl | 15.8MB | |
| bindersa.stl | 9.0MB | |
| bindersb.stl | 3.1MB |
