Parts to create replica Laser Pistol from the pilot episode of Star Trek, called "The Cage", based off of mfritz's model https://www.thingiverse.com/thing:3929291 and plrmaker7's model https://www.thingiverse.com/thing:939038 I used those pieces as reference as I redesigned the parts in Autodesk Inventor to house the electronics.
This one has a working trigger which activates the emitter light. The barrel front can be rotated to select the proper emitter size. The emitter parts were printed on the Anycubic Photon S resin printer and the rest were printed on a PRUSA MK3S.
This project requires additional parts:
1.5" diameter Brass Tube (sourced from eBay)
Micro Switch: https://www.amazon.com/gp/product/B07D9C2B6J
9V Battery Connector: https://www.amazon.com/gp/product/B085X11D22
10mm Red LED: https://www.amazon.com/gp/product/B00EZZCKZY
1.8mm metal rod: https://www.amazon.com/gp/product/B07KY9578R
Tools needed:
Pin Vise to drill the mounting holes for the 1.8mm rod for the trigger
Dremel with cut off wheel to cut brass tube to size, and a cutting bit to cut a groove out where the barrel meets the handle.
| BarrelFront.stl | 2.5MB | |
| BarrelMiddle.stl | 155.4KB | |
| BarrelRear.stl | 2.4MB | |
| BatteryHolder.stl | 38.7KB | |
| BulbHolder.stl | 342.7KB | |
| EmitterBackingDisc.stl | 45.0KB | |
| EmitterLarge.stl | 64.3KB | |
| EmitterMedium.stl | 62.8KB | |
| EmitterSmall.stl | 77.0KB | |
| HandleLeft.stl | 83.4KB | |
| HandleRight.stl | 81.9KB | |
| HandleTrigger.stl | 32.2KB | |
| StandBottom.stl | 237.4KB | |
| StandCenter.stl | 89.5KB | |
| StandTop.stl | 136.9KB |
