A replica of the Phaser (Type I) prop from the original Star Trek series. This is the "midgrade" version (detailed enough to be seen in close-up, but no moving parts or electric components); a "hero" version is also in the works, and there is also a Type II body into which these will fit.

I've included bodies for both the original version from the early first season, and the Wah Ming Chang screen-friendlier redesign that was used throughout the rest of the series.

For the early version, print "Midgrade P1 Body - Early Season One", "Midgrade P1 Thumbwheel", and "Midgrade P1 Emitter".

For the later version, print "Midgrade P1 Body", "Midgrade P1 Thumbwheel", "Midgrade P1 Emitter", "Midgrade P1 Crispy", "Midgrade P1 Rail 1", and "Midgrade P1 Rail 2".

There's also a "unibody" version of the latter, for those who absolutely hate printing multipart models, though it would make painting somewhat more tedious, and I would suggest using supports for the bottom of the thumbwheel (the bodies are intended to be printed vertically, with no supports).

NEW: I've added, by request, a "Midgrade P1 Body - Hollow" for SLS printing services. This version passes the Shapeways checks for all the plastic options currently available.

For the later version, you will also need an acrylic sealer such as Mod Podge, clear epoxy, an 8.5mm (1/3") length of 19mm (3/4") diameter clear acrylic rod for the gauge cover, and optionally a watch crown for the power indicator (I used an Esslinger jeweled dustproof watch crown refill, 4.5mm, Tap 10, Yellow w/ Blue) and an 8mm diameter by 3mm high (5/16" diameter by 3/32" high) cylindrical neodymium magnet for a "trigger" which doubles as a means of mounting the phaser on a ferrous or magnetic surface for display.