Star Trek Discovery Phaser Upgrade Kit (sliced And Improved) 3D Printer Model
The file 'Star Trek Discovery Phaser Upgrade Kit (sliced And Improved) 3D Printer Model' is (stl) file type, size is 3.1MB.
The file 'Star Trek Discovery Phaser Upgrade Kit (sliced And Improved) 3D Printer Model' is (stl) file type, size is 3.1MB.
I started from the very nice model uploaded by Al Pokemon, but I would like to have the small phaser removable (as the original one) and after that I had to slice the body in two to have a better and easier print.
I also modified the power wheel to print it separately, mount it on the body and let it able to turn.
Not a great job but I though someone else could appreciate.
I read about the choice of Security0051... But I truly believe in Open Source and I don't think to cancel things is a good way to fight against the copies of our job.
Do it better, don't mind the rest.
All the best!
UPGRADE 01: I uploaded a new handle Kit, for people who would like to put a battery and a LED inside the handle to make a realistic charge display. You just have to print the who parts and glue a transparent sheet behind the holes. Well I'll add a microswitch to switch on the light, but that's easy to do.
UPGRADE 02: I modified the internal phaser to be more realistic. In the same time I splitted it in two parts, to make you able to open the upper display. For the happiness of people that use Thingiverse to make business, I placed the ITALYmaker logo on the bottom :-)
| Back.stl | 403.4KB | |
| Body.stl | 1.1MB | |
| handle01.stl | 448.5KB | |
| handle02.stl | 66.4KB | |
| internal_phaser_upgrade_02.stl | 1.2MB | |
| Kit_handle_for_LED_charge.stl | 772.0KB | |
| Phaser.stl | 1.0MB | |
| PhaserEmitter.stl | 813.9KB | |
| Phaser_top.stl | 128.7KB | |
| upgrade_kit.stl | 2.2MB | |
| Wheel.stl | 122.9KB |
