This is the Star Saber from Transformers Prime!
The sword is 5 feet long, but it is stable enough to swing once its all solid and together. There is also a whole going through the length of the blade, it should be 4.5 feet long, and it is 6 mm thick. So if you can find a 6mm rod, cut it down to length and fit the parts onto it. That will make the entire blade so much stronger and more durable.
I recommend plastic welding to make the seams really sturdy as well.
This model was not designed by me, it is from Brock Billings on Sketchfab. He gave me permission to share the file. Here is the link to his other works, and to the original file:
If you print this, make sure to thank Brock for creating and sharing it!
In regards to the design, I added details to the blade and some permanent supports along part of blade so that they are sturdy and do not wobble on their own. I also made the handle longer, and placed the pommel from "Redo/Update to Star Saber" by BryanPrime917 over the original one.
Included in the files are the way I have split them up, being "SSG 1" through "SSG 6." However, there is also the full sword, so that you can split it up on your own.
I seriously enjoyed this build, and I hope anyone that makes it does too!
Happy printing!!
| SSG_1.stl | 649.3KB | |
| SSG_1_extra_support.stl | 674.6KB | |
| SSG_2.stl | 1.4MB | |
| SSG_3.stl | 1.9MB | |
| SSG_4.stl | 1.9MB | |
| SSG_5.stl | 379.7KB | |
| SSG_6.stl | 273.0KB | |
| Star_Saber_Giant.stl | 5.4MB |
