"If the metal handle tabs come off your Stanley "Quencher H2.0 Tumbler" 40oz cup, this works well as a replacement.
Print supports, then slide on from the bottom. It should be just a bit too tight to slide right on, so use a heat gun or small torch to just slightly warm up the rings, and pull on gently as they relax."
Remix of original and prints with less supports and simply glue parts together
| Part_Studio_1_Copy_1_-_Part_1_4.stl | 662.3KB | |
| Part_Studio_1_Copy_1_Copy_1_-_Part_1_1.stl | 634.2KB |
