Here are four different servo mount configuration for standard sized servos. To mount the servos you can use #6-32 x 1-1/2" machine screws, these can be found at Home Depot for like a $1.18 for 6 screws with nuts included. Ive only personally printed the bracket for two 1/4" threaded rods, and modified it for the remaining brackets. This being said, I haven't personally tested the 3 other mounts, and would appreciate it if you could let me know if those worked well or if I need to make modifications. Print at 25.4 scale if using a printer based in mm, as I designed these mounts in inches. The bottom mounted brackets have a thicker bottom with with recessed holes so you can mount it to a flat surface without any problems.
| ServoBracketBottom.stl | 86.4KB | |
| ServoBracketBottomType2.stl | 99.1KB | |
| servobracketcompleteREV1.stl | 76.4KB | |
| ServoBracketSide.stl | 70.2KB |
