A display stand I made for an approximately 9x12x1 Fish Fossil in Substrate.
Suitable for a framed picture, ceramics, etc.
Lean back angle is large due to the weight of the intended specimen.
Included spacers are 120mm. The pegs are very deep and keep without glue, holes were cleaned out with a dremel. The pegs are actually 12 sized polygons with zero clearance at the points, so should tap in easily if you do a good job cleaning up the holes.
| 120mm_spacers_w_pegs.stl | 635.2KB | |
| stand_for_9x12_version2metric.stl | 47.3KB |
