Stand For 6″ Hasbro Black Series Star Wars Figures 3D Printer Model
The file 'Stand For 6″ Hasbro Black Series Star Wars Figures 3D Printer Model' is (stl) file type, size is 69.0KB.
The file 'Stand For 6″ Hasbro Black Series Star Wars Figures 3D Printer Model' is (stl) file type, size is 69.0KB.
I've had a fair amount of trouble trying to display my 6" Black Series Star Wars figures on shelves, since many of them aren't very stable. You can buy stands on eBay, but they tend to cost around $5 apiece, which is quite expensive if you have a large collection. So I decided to make some of my own.
Hasbro has used at least two different sizes of foot holes for its figures, so I have provided two versions of the stand. Each is marked on the bottom so you can tell them apart. Version A is the one you'll want to use for most figures, while Version B has slightly larger pegs for figures like Vader and Chewbacca (and possibly others). I haven't been able to test these with every figure, so I can't guarantee these will work with everything, but please let me know if you do try them. The pegs are fairly tight, but that's the way you want it. Just sort of screw the feet on and most figures will stay on the stand quite well. I found that a silver or grey plastic looked the best. Black makes it too hard to see the logo.
| black_series_stand_a.stl | 134.4KB | |
| black_series_stand_b.stl | 141.9KB |
![[WIP] – SW X-WING THE MINIATURE GAME MANEUVER DIAL – REBEL ALLIANCE 3D Printer Model](https://cdn.3axis.co/assets/43/d2/2b/5a/43d22b5a-66be-40a0-891b-a1019b6fa854/images/554621e6-69c0-46f3-bb9f-77c728e97053_thumb.jpg)
