A larger version of my 25mm paint stand https://www.thingiverse.com/thing:4177529
Features:
Different versions of the parts so you can customize it for your needs.Relatively short print times.Assembly with little to no glue.Small overall size.Before you start printing choose a Horizontal for how many paint tubes across you want for your stand (5 pictured), and a Vertical for how high you want (2 pictured).
You will need a Horizontal plate for each layer high you want and one corresponding Support. If built for 5 wide or less only 2 Verticals are needed, for 6 or greater you will need 3.
| Horizontal_3.stl | 128.8KB | |
| Horizontal_4.stl | 134.3KB | |
| Horizontal_5.stl | 166.7KB | |
| Horizontal_6.stl | 181.7KB | |
| Horizontal_7.stl | 210.9KB | |
| Horizontal_8.stl | 240.1KB | |
| Support_3.stl | 4.8KB | |
| Support_4.stl | 4.8KB | |
| Support_5.stl | 4.8KB | |
| Support_6.stl | 6.7KB | |
| Support_7.stl | 6.7KB | |
| Support_8.stl | 6.7KB | |
| Vertical_2.stl | 6.5KB | |
| Vertical_3.stl | 7.7KB | |
| Vertical_4.stl | 8.9KB | |
| Vertical_5.stl | 10.0KB |
