Stalking Turret 3D Printer Model
The file 'Stalking Turret 3D Printer Model' is (3dm,stl) file type, size is 13.8MB.
The file 'Stalking Turret 3D Printer Model' is (3dm,stl) file type, size is 13.8MB.
What every space marine needs for duck hunting.
I have printed the initial version of this model, and it's workable, but there are some fitment issues with the gun swivels clearing the main plate radome housing.
For V2, I made some improvements - the big one is I lengthened the main plate to better fit a Rhino, I raised the swivels to fix the clearance problems, and I thickened the v1 antenna which doesn't print well, it's too thin.
I also made some cosmetic changes for myself - I replaced the radar dish with a half-radome which I think is cooler looking, and I changed the gun barrels a little.
I also broke the parts into groups to make it easier to lay out for printing.
I would suggest only printing the v2 parts, but I am leaving the originals up because those are the most accurate to the model that inspired them. You can also mix and match as needed - use all v1 parts except the taller swivels.
| SM_Stalker_turret.3dm | 9.0MB | |
| stalker_antenna.stl | 203.1KB | |
| stalker_dish.stl | 196.6KB | |
| stalker_gun_L.stl | 5.2MB | |
| stalker_gun_R.stl | 5.2MB | |
| stalker_mount_print_two.stl | 197.7KB | |
| stalker_plate.stl | 2.6MB | |
| stalker_swivel_print_two.stl | 3.0MB | |
| V2_SM_Stalker_turret.3dm | 10.4MB | |
| v2_stalker_antenna.stl | 134.7KB | |
| v2_stalker_barrels_1.stl | 1010.1KB | |
| v2_stalker_barrels_2.stl | 1010.1KB | |
| v2_stalker_gun_body_L.stl | 4.6MB | |
| v2_stalker_gun_body_R.stl | 4.5MB | |
| v2_stalker_gun_wheel_1.stl | 176.0KB | |
| v2_stalker_gun_wheel_2.stl | 176.0KB | |
| v2_stalker_mount_1.stl | 252.7KB | |
| v2_stalker_mount_2.stl | 252.7KB | |
| v2_stalker_plate.stl | 3.4MB | |
| v2_stalker_swivel_1.stl | 3.1MB | |
| v2_stalker_swivel_2.stl | 3.1MB |
