Stackable Spool Storage For Material4Print Spools (No Screws Needed) 3D Printer Model
The file 'Stackable Spool Storage For Material4Print Spools (No Screws Needed) 3D Printer Model' is (3mf,stl) file type, size is 1.3MB.
The file 'Stackable Spool Storage For Material4Print Spools (No Screws Needed) 3D Printer Model' is (3mf,stl) file type, size is 1.3MB.
Update 15.03.2021:
added a bigger spool box with 180° to store longer objects
Update 09.03.2021:
feet:
added feet base that snaps into the center hole of the spool.
added small feet.
glue them in the tiny holes of the feet base.
(print them at 0,1mm layer height and low speed (about 20mm/s))
Update 07.03.2021:
Spool connector V2:
changed the Outer fit-diameter for a better fit.
also made the wall thicker, the V1 kept cracking when pressing on a spool.
now it has a nice snug fit and wont crack.
Hi guys,
i know that there are a lot of spool storage boxes out there on thingiverse.
but not the one that fitted for my spools.
i use PLA from Material4Print and had a lot of empty spools laying around,
so i decided to upcycle them.
I Made the Assembly pretty easy by designing some small pins.
Just drill 4mm holes in the spool, insert the storage box and
push the pins in from both sides.
they should hold up from theirselves, if not, ad some glue
feel free to follow me :)
| Big_Spool_Box.3mf | 263.5KB | |
| Drilling_Guide.stl | 216.9KB | |
| Feet.3mf | 15.7KB | |
| feet_base.3mf | 396.2KB | |
| Pin.3mf | 15.8KB | |
| Spool_connector_V2.3mf | 225.5KB | |
| Spulenschublade.3mf | 169.1KB | |
| Spulenverbinder.3mf | 230.6KB |
