Just a stackable parts storage thing. Hundreds like it, but this one suited my needs best. :)
It's larger than most I've found, cubes are 100mm. Single bay drawers are large enough to hold most SBCs
Nothing fancy about the print...use whatever settings/printer/material works for you. Attached images were printed on an E3Pro, with Duramic PLA Plus, .2mm 110mm/s
Supports are only possibly required for the handles on drawers.
Joiners should fit loosely in an individual box's slots, but when joining too boxes together over a joiner it should be a tight fit. Rescale as necessary.
There's 9 cube versions, 3 columns by 3 rows. First word is the row (Bottom, Middle, Top), second is the column (Left, right, middle). You can mix or match for whatever stacks suit your needs.
4 drawer designs as well, number indicates how many bays are in the drawer.
UPDATE : 2020-06-03 - Modified/Replaced Drawer_4.stl so the middle"wall" can clear the retaining tabs more easily.
| Cube_Bottom_Left.stl | 127.5KB | |
| Cube_Bottom_Middle.stl | 131.1KB | |
| Cube_Bottom_Right.stl | 118.0KB | |
| Cube_Middle_Left.stl | 136.0KB | |
| Cube_Middle_Middle.stl | 142.2KB | |
| Cube_Middle_Right.stl | 127.5KB | |
| Cube_Top_Left.stl | 135.3KB | |
| Cube_Top_Middle.stl | 146.6KB | |
| Cube_Top_Right.stl | 133.3KB | |
| Drawer_1.stl | 17.8KB | |
| Drawer_2.stl | 22.6KB | |
| Drawer_3.stl | 26.9KB | |
| Drawer_4.stl | 39.0KB | |
| Joiner.stl | 5.6KB |
![Antique Jewelry Box [Support Free] 3D Printer Model](https://cdn.3axis.co/assets/ef/d3/15/bd/efd315bd-660a-4b52-a05a-d33703032cc3/images/362b85d1-5b4b-4eb9-b5c8-56c234ab8385_thumb.jpg)
