Stackable Gridfinity Base 3D Printer Model
The file 'Stackable Gridfinity Base 3D Printer Model' is (step,stl) file type, size is 16.2MB.
The file 'Stackable Gridfinity Base 3D Printer Model' is (step,stl) file type, size is 16.2MB.
Use this base as a mount for a second layer of gridfinity bins. Perfect for when you want to stack small bins on top of a large bin.
A bed with good adhesion is recommended for this print. I had bed adhesion issues with a textured PEI plate, but the smooth PEI plate worked well (no glue).
No supports required.
When stacked, the base has a height of 7mm (1U).
| Stackable_Base_3x3.step | 1.1MB | |
| Stackable_Base_3x3.stl | 2.0MB | |
| Stackable_Base_3x4.step | 1.6MB | |
| Stackable_Base_3x4.stl | 2.7MB | |
| Stackable_Base_3x5.step | 2.0MB | |
| Stackable_Base_3x5.stl | 3.4MB | |
| Stackable_Base_3x6.step | 2.4MB | |
| Stackable_Base_3x6.stl | 4.0MB | |
| Stackable_Base_4x4.step | 2.1MB | |
| Stackable_Base_4x4.stl | 3.6MB | |
| Stackable_Base_4x5.step | 2.6MB | |
| Stackable_Base_4x5.stl | 4.5MB | |
| Stackable_Base_4x6.step | 3.2MB | |
| Stackable_Base_4x6.step.stl | 5.4MB | |
| Stackable_Base_5x5.step | 3.3MB | |
| Stackable_Base_5x5.stl | 5.6MB | |
| Stackable_Base_5x6.step | 4.0MB | |
| Stackable_Base_5x6.stl | 6.8MB | |
| Stackable_Base_6x6.step | 4.8MB | |
| Stackable_Base_6x6.stl | 8.2MB |
![=== [Gridfinity 5] === V1.0 3D Printer Model](https://cdn.3axis.co/assets/f0/fe/41/f3/f0fe41f3-501f-4516-9c72-39fe2fa68636/images/252ef8b7-45bd-44c8-b276-1648763e93b3_thumb.jpg)
