UPDATE (18/02/2020) :

• I've removed the V1 models to avoid confusion.

• New model with more chamfers on the corner for printing with higher speed. Hope this can fix the corner issue mentioned by jarda3d. The new model should have a new "C" prefix on the name.

UPDATE (09/06/2019) :

• New model with more chamfers on the corner for printing with higher speed. Hope this can fix the corner issue mentioned by jarda3d. The new model should have a new "C" prefix on the name.

UPDATE (08/06/2019) :

• Better file prefix system :

  • VM : Vase mode
  • V# : Version number
  • W : Larger opening version
  • X# : Combined width ( X2 = 2 container side by side )
• New X2 type, same dimensions but twice the width. It saves about 30% of filament and print time, if you don't need the separator. Also good for long objects. The top side of the X2 version is a bit flimsy, but you can make it stronger by assembling it with the X1 version.

UPDATE (07/06/2019) :

• Synchronized chamfer size.
• Synchronized dove-tail size and position ( pyramid stacking should be possible now).
• PLEASE USE V2 for the latest update.
• V2 will not fit with previous version.

I was in need for a stackable container for screws and some small electronic parts but all the one available are not vase-able (vase mode able, yes I just made that word), containers with vase mode are mostly not stackable or has no openings. So I designed one myself, my need was stackable, has opening, quick and easy to print (hence vase mode), mechanical strength - enough. Then I ended up with this design, it utilizes dove tail joint to connect each container and can still be printed in vase mode. Please refer to my recommended settings to print this. If you need anything don't hesitate to let me know.

Dimensions

• 70 x 52 x 42 mm
• Weighs about 10 grams each

Inspiration

• Stacking box
• Stackable box